View MBRM140T3D_287936.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MBRM140T3/D
Advance Information Surface Mount Schottky Power Rectifier
MBRM140T3
SCHOTTKY BARRIER RECTIFIER 1.0 AMPERES 40 VOLTS
POWERMITE(R) Power Surface Mount Package
The Schottky Powermite employs the Schottky Barrier principle with a barrier metal and epitaxial construction that produces optimal forward voltage drop-reverse current tradeoff. The advanced packaging techniques provide for a highly efficient micro miniature, space saving surface mount Rectifier. With its unique heatsink design, the Powermite has the same thermal performance as the SMA while being 50% smaller in footprint area, and delivering one of the lowest height profiles, < 1.1 mm in the industry. Because of its small size, it is ideal for use in portable and battery powered products such as cellular and cordless phones, chargers, notebook computers, printers, PDAs and PCMCIA cards. Typical applications are ac/dc and dc-dc converters, reverse battery protection, and "Oring" of multiple supply voltages and any other application where performance and size are critical. Features: * Low Profile -- Maximum Height of 1.1 mm * Small Footprint -- Footprint Area of 8.45 mm2 * Low VF Provides Higher Efficiency and Extends Battery Life * Supplied in 12 mm Tape and Reel -- 12,000 Units per Reel * Low Thermal Resistance with Direct Thermal Path of Die on Exposed Cathode Heat Sink Mechanical Characteristics: * Powermite is JEDEC Registered as D0-216AA * Case: Molded Epoxy * Epoxy Meets UL94, VO at 1/8 * Weight: 62 mg (approximately) * Device Marking: BCJ * Lead and Mounting Surface Temperature for Soldering Purposes. 260C Maximum for 10 Seconds MAXIMUM RATINGS
Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR, TC = 110C) Peak Repetitive Forward Current (At Rated VR, Square Wave, 100 kHz, TC = 110C) Non-Repetitive Peak Surge Current (Non-Repetitive peak surge current, halfwave, single phase, 60 Hz) Storage Temperature Operating Junction Temperature Voltage Rate of Change (Rated VR, TJ = 25C) Symbol VRRM VRWM VR IO IFRM IFSM Tstg TJ dv/dt Value 40 Unit V
ANODE CATHODE CASE 457-04 ISSUE C
1.0 2.0 50 -55 to 150 -55 to 125 10,000
A A A C C V/ms
THERMAL CHARACTERISTICS
Thermal Resistance - Junction-to-Lead (Anode) (1) Thermal Resistance - Junction-to-Tab (Cathode) (1) Thermal Resistance - Junction-to-Ambient (1) (1) Mounted with minimum recommended pad size, PC Board FR4, See Figures 9 & 10.
This document contains information on a new product. Specifications and information herein are subject to change without notice.
Rtjl Rtjtab Rtja
35 23 277
C/W
POWERMITE is a registered trademark of MicroSemi Corporation
Rev 1
(c)RectifierInc. 1998 Data Motorola, Device
1
MBRM140T3
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (2), See Figure 2 (IF = 0.1 A) (IF = 1.0 A) (IF = 3.0 A) Maximum Instantaneous Reverse Current, See Figure 4 (VR = 40 V) (VR = 20 V) (2) Pulse Test: Pulse Width 250 s, Duty Cycle 2%. IR VF TJ = 25C 0.36 0.55 0.85 TJ = 25C 0.5 0.15 TJ = 85C 0.30 0.515 0.88 TJ = 85C 25 18 mA V
IF, INSTANTANEOUS FORWARD CURRENT (AMPS)
10
IF, INSTANTANEOUS FORWARD CURRENT (AMPS)
100
10
1.0
TJ = 150C TJ = 85C TJ = 25C TJ = -40C
1.0 TJ = 150C TJ = 85C TJ = 25C
0.1 0.1 0.3 0.5 0.7 0.9 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
0.1 0.1 0.3 0.5 0.7 0.9 VF, MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
Figure 1. Typical Forward Voltage
Figure 2. Maximum Forward Voltage
100E-3 I R, REVERSE CURRENT (AMPS) TJ = 150C TJ = 85C
100E+0 I R, MAXIMUM REVERSE CURRENT (AMPS) 10E+0 1.0E+0 TJ = 150C
10E-3
1.0E-3
100E-3 TJ = 85C 10E-3 1.0E-3 TJ = 25C
100E-6 TJ = 25C 10E-6
100E-6 10E-6 0 10 20 30 40 VR, REVERSE VOLTAGE (VOLTS)
1.0E-6 0 10 20 30 40 VR, REVERSE VOLTAGE (VOLTS)
Figure 3. Typical Reverse Current
Figure 4. Maximum Reverse Current
2
Rectifier Device Data
MBRM140T3
I O , AVERAGE FORWARD CURRENT (AMPS) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 25 35 45 55 65 75 85 95 105 115 125 TL, LEAD TEMPERATURE (C) Ipk/Io = 10 Ipk/Io = 20 SQUARE WAVE Ipk/Io = p Ipk/Io = 5 dc FREQ = 20 kHz PFO , AVERAGE POWER DISSIPATION (WATTS) 1.8 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 IO, AVERAGE FORWARD CURRENT (AMPS) Ipk/Io = 10 Ipk/Io = 20 Ipk/Io = 5 Ipk/Io = p SQUARE WAVE dc
Figure 5. Current Derating
TJ , DERATED OPERATING TEMPERATURE ( C) 1000 125
Figure 6. Forward Power Dissipation
115
C, CAPACITANCE (pF)
TJ = 25C
105 Rtja = 33.72C/W 95 51C/W 69C/W 85 75 0 5.0 10 15 20 25 30 35 40 VR, DC REVERSE VOLTAGE (VOLTS) 83.53C/W 96C/W
100
10 0 5.0 10 15 20 25 30 35 40 VR, REVERSE VOLTAGE (VOLTS)
Figure 7. Capacitance
Figure 8. Typical Operating Temperature Derating*
R (T) , TRANSIENT THERMAL RESISTANCE (NORMALIZED)
* Reverse power dissipation and the possibility of thermal runaway must be considered when operating this device under any reverse voltage conditions. Calculations of TJ therefore must include forward and reverse power effects. The allowable operating TJ may be calculated from the equation: TJ = TJmax - r(t)(Pf + Pr) where r(t) = thermal impedance under given conditions, Pf = forward power dissipation, and Pr = reverse power dissipation This graph displays the derated allowable TJ due to reverse bias under DC conditions only and is calculated as TJ = TJmax - r(t)Pr, where r(t) = Rthja. For other power applications further calculations must be performed. 1.0 50% 20% 0.1 10% 5.0% 2.0% 1.0% Rtjl(t) = Rtjl*r(t) 0.001 0.00001
0.01
0.0001
0.001
0.01 T, TIME (s)
0.1
1.0
10
100
Figure 9. Thermal Response Junction to Lead
Rectifier Device Data
3
MBRM140T3
1.0 R (T) , TRANSIENT THERMAL RESISTANCE (NORMALIZED) 50% 20% 0.1 10% 5.0% 0.01
2.0% Rtjl(t) = Rtjl*r(t)
1.0% 0.001 0.00001
0.0001
0.001
0.01
0.1 T, TIME (s)
1.0
10
100
1,000
Figure 10. Thermal Response Junction to Ambient
PACKAGE DIMENSIONS
-A- C J S
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. MILLIMETERS INCHES MIN MAX MIN MAX 1.75 2.05 0.069 0.081 1.75 2.18 0.069 0.086 0.85 1.15 0.033 0.045 0.40 0.69 0.016 0.027 0.70 1.00 0.028 0.039 -0.05 +0.10 -0.002 +0.004 0.10 0.25 0.004 0.010 3.60 3.90 0.142 0.154 0.50 0.80 0.020 0.031 1.20 1.50 0.047 0.059 0.50 REF 0.019 REF
F 0.08 (0.003)
M
TB
S
C
S
TERM. 1
-B- K
TERM. 2
R L J H -T- 0.08 (0.003)
M
D TB
S
C
S
CASE 457-04 ISSUE C
DIM A B C D F H J K L R S
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 - http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ JAPAN: Motorola Japan Ltd.; SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan. 81-3-5487-8488
4
RectifierMBRM140T3/D Device Data

▲Up To Search▲

Price & Availability of MBRM140T3D

	To Download MBRM140T3D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .